assembly instructions 8-Cube Organizer

>> assembly instructions

8-Cube Organizer

style dpci nish

4274 002-11-0793 Avington

4280 002-11-0794 White

4291 002-11-0796 Weathered Gray

supplied

Congratulations on your latest Target purchase.

Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.

All you need to do is follow our simple instructions and you’ll be on your way to transforming your room

in no time. Good luck—though we’re condent you won’t need it.

tools needed

before you begin

1. Check for damaged or missing parts. Call 1-800-874-0008 to order missing supplies.

2. Use the carton as a working surface to prevent product damage during assembly.

3. Gather all tools prior to assembly.

3QUESTIONS? Just call 1-800-874-0008 for parts and service. For faster service, have the style number and DPCI number ready when calling.

introduction 2

hardware 4

parts list 5

safety precautions 6

installing L-bracket 7

assembly 8-12

additional accessories 13

weight capacity/care instructions 14

table of contents

hardware

(H1) x 22

pre-glued dowel

(H2) x 8

hex screw

(H3) x 2

L-bracket screw

#10 x 1/2”

(H4) x 2

wall screw

#10 x 1-1/2”

(H5) x 2

L-bracket

ITEM DESCRIPTION QUANTITY

A side panel 2

B top/ bottom panel 2

C divider 4

D xed shelf 3

safety precautions

warning

• This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or

serious injury could occur.

• Always unload unit prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either tip or collapse.

Serious bodily injury and/or damage to personal belongings may occur.

• Do not overload unit. If any shelf, top, or bottom of unit bows or bends, it is overloaded. The shelf, top, or bottom could collapse and cause

serious bodily injury and/or damage to personal belongings.

• Do not climb or step on the unit. This is not a bench. The unit may become unstable and either tip or collapse. Serious bodily injury and/or

damage to personal belongings may occur.

• Do not use this unit as a television stand. Serious bodily injury and/or damage to personal belongings may occur.

• Do not mount or attach anything to the sides, rear or front of the unit as this can create a force which can cause the unit to tip. Serious bodily

injury and/or damage to personal belongings may occur.

• Do not stack units. Stacking of units can cause an unsafe tip-over hazard which may cause serious bodily injury and/or damage to personal

belongings.

• Do not hang this unit on the wall. The product structure is not designed for wall hanging. Serious bodily injury, damage to personal belongings,

and/or damage to the wall may occur.

• All units must be secured individually to wall stud using hardware provided. If wall stud is not accessible, consult your local hardware store for

appropriate mounting hardware. Failure to do so may create an unsafe tipping hazard that could lead to serious bodily injury and/or damage to

personal belongings.

• Follow proper safety procedures if using power tools and ladders.

• We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood oors, etc.

• We recommend you hand-tighten screws. Use care not to overtighten if using power tools.

installing L-bracket

There are several "key points" to L-

bracket installation. Please

review the drawings and

comments at right as well as

the assembly steps provided.

All units must be fastened to the wall.

Always mount L-bracket to a wall-

stud.

The L-bracket is intended to be

installed on panel B.

Install the screw hole end of L-bracket against

at least one wall stud; horizontal adjustable end

against unit. L-bracket must be mounted no more

than 1 1/2 inches from edge of panel.

panel A

panel B

Secure L-bracket on the inside of panel B. See step 5

for detailed installation instructions.

wall

stud

Serious or fatal crushing injuries can occur

from furniture tip-over. To help prevent

tip-over:

- Install tip-over restraint provided.

- Unless speciﬁcally designed to accommodate,

do not set TVs or other heavy objects on top of

this product.

- Never allow children to climb or hang on

drawers, doors, or shelves.

- Place heavy items on lower shelves and as far

back as possible.

Use of tip-over restraints may only reduce,

but not eliminate, the risk of tip-over.

This is a permanent label. Do not attempt to remove.

WARNING

step 1.

1. Arrange dividers (C) and xed shelves (D) as shown.

2. Quickly dip pre-glued dowels into a cup of water, making sure entire dowel gets wet.

3. Immediately push dowels into holes on unnished edges of each panel. Three dividers will only have two dowels on one side.

(H1)

(H1) x 22

pre-glued dowel

22x

step 2.

1. Align dowels on dividers (C) with center holes on xed shelves (D) as shown.

2. Push dividers into place. Dowels in divider (C) should interlock with divider (C) on other side of xed shelf (D).

1. Align dowels on dividers (C) with center holes on both top/bottom panels (B).

2. Push top/bottom panels into place.

step 3.

step 4.

1. Align center holes in each side panel (A) with dowels in xed shelves (D).

2. Secure side panels (A) to both top/bottom panels (B) using four hex screws for each panel. Tighten screws using supplied hex wrench.

(H2) x 8

hex screw

(H2)

step 5.

1. Align side of unit with wall stud.

2. Place small hole end of L-bracket against wall/wall stud. Use 1-1/2” screw to secure L-bracket to wall.

3. Use 1/2” screw to secure L-bracket to panel B. L-bracket must be mounted no more than 1 1/2 inches from edge of panel.

warning

All units MUST be fastened to the wall.

panel B

panel A

(H4)

(H3)

wall stud

(H5) x 2

L-bracket

(H3) x 2

L-bracket screw

#10 x 1/2”

(H4) x 2

wall screw

#10 x 1-1/2”

1 in.

MAX

additional accessories - purchased separately

CASTERS

FEET

USE 2 SETS WITH ORIENTATIONS SHOWN BELOW

USE 3 SETS WITH ORIENTATIONS SHOWN BELOW

USE 2 SETS WITH ORIENTATIONS SHOWN BELOW

USE 3 SETS WITH ORIENTATIONS SHOWN BELOW

DO NOT USE WITH ORIENTATIONS SHOWN BELOW

weight capacity/care instructions

This unit has been designed for the weight

shown. Exceeding this recommended weight

could result in excessive "sagging" of the top

or shelves. Extreme overloading can cause

failure of the unit and possible injury.

Care Instructions:

Dust with a clean, lint-free dry cloth.

warning

30 lbs.

50 lbs.

30 lbs.

105 lbs.

30 lbs.